The computer package developed for the preliminary design of multistage axial compressor described in part (I) is applied here for the design of compressor of a typical aeroengine.This compressor is in close proximity to compressor in the CF6-60 turbofan engine. For the same design conditions, the calculated compressor has the same number of stages and layout as that of the CF6 engine. Detailed results concerning both aerodynamic and mechanical designs are presented here.
Abdel Azim, A., Hamed, A., & Shehata, W. (2003). A Preliminary Design for Multistage Axial Flow Compressors Part 11: Case study. International Conference on Aerospace Sciences and Aviation Technology, 10(10th International Conference On Aerospace Sciences & Aviation Technology), 169-184. doi: 10.21608/asat.2013.24418
MLA
Ahmed F. Abdel Azim; Ahmed Hamed; Wael Shehata. "A Preliminary Design for Multistage Axial Flow Compressors Part 11: Case study". International Conference on Aerospace Sciences and Aviation Technology, 10, 10th International Conference On Aerospace Sciences & Aviation Technology, 2003, 169-184. doi: 10.21608/asat.2013.24418
HARVARD
Abdel Azim, A., Hamed, A., Shehata, W. (2003). 'A Preliminary Design for Multistage Axial Flow Compressors Part 11: Case study', International Conference on Aerospace Sciences and Aviation Technology, 10(10th International Conference On Aerospace Sciences & Aviation Technology), pp. 169-184. doi: 10.21608/asat.2013.24418
VANCOUVER
Abdel Azim, A., Hamed, A., Shehata, W. A Preliminary Design for Multistage Axial Flow Compressors Part 11: Case study. International Conference on Aerospace Sciences and Aviation Technology, 2003; 10(10th International Conference On Aerospace Sciences & Aviation Technology): 169-184. doi: 10.21608/asat.2013.24418
)
View on SCiNiTO